Badger-meter 340 BN/MB Btu Energy Transmitter Manuel d'utilisateur télécharger pdf (Page 14)

PROGRAMMING

Connecting Via DIC COM Port

Programming the 340 BN/MB Btu Energy Transmitter is accomplished by installing Badger Meter programming software on a

computer and entering data on templates of the Windows based program.

1. Load the interface software into the computer.

2. Power the 340 BN/MB Btu Energy Transmitter with 12-24V AC/DC.

3. Connect the computer to the transmitter with the Data Industrial Series A-301 communications cable to the socket

labeled “D.I.C. COM port”, taking care to properly align the tab on the plug and socket to maintain polarity. Connect

the DB9 connector of the Data Industrial Series A301 communications cable to a PC COM port that has the 340

software installed. If a DB9 COM port is not available, a USB to COM Port Adapter may be purchased locally.

4. Open the program and from the Device tab and select 340 as shown in the dialog box below.

Figure 15: Select 340

5. After the 340 device has been selected, select the Type, 340BN/MB.

Figure 16: Device Type

Data Industrial® 340 BN/MB BTU Energy Transmitter

Page 14 July 2012

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Pas de commentaire

Badger-meter 340 BN/MB Btu Energy Transmitter Manuel d'utilisateur Page 14